Hi
Can anyone tell me how to install a sound decoder
It's not a plug-in install, so you'd have to remove the stock decoder board and then solder the wires for track power and motor control to a sound decoder. The headlight LED is actually part of the stock decoder board, so you'd need to wire up your own LED if you want a headlight.
(http://www.spookshow.net/loco/files/bachdccdood.jpg)
-Mark
Thanks a lot Mark I want to double check do I need to cut the board anywhere
ED
The whole board is the decoder, so basically you'd just remove it entirely.
-Mark
Mark I am sorry to take your time but I am confused On this unit there is rail pickup only on one side the red side that is why I thought I should solder the new decoder wires to the solder inlets on the surface of the master board example R,M+,LF-,L+LB-,M-L-
A side note I really appreciate your web site
Mark Thanks for your replies very helpful I j=have figured it out