dear bachmann,
my ho thomas train is wobbling of the rails. :-\ What should i do? ???
tim
Well first of all how secure is your track?
yes
the tracks are fine,but he came of
when i made it go to fast and it came of the rails.
That tends to happen with most model trains. If you run them to fast around a curve they will hop the rails and derail. You didn't mention what piece of track he fell of. If it was a curve, it most likely because he was going to fast.
Quote from: BillingsRR on January 29, 2011, 12:59:53 PM
That tends to happen with most model trains. If you run them to fast around a curve they will hop the rails and derail. You didn't mention what piece of track he fell of. If it was a curve, it most likely because he was going to fast.
You won't find too many HO scale trains that will jump an 18 inch radius curve (especially Thomas), and I'm sure the track Tim used wasn't less than an 18 inch radius. So, if Thomas came off on a curve, it was most likely a connection problem or something was physically wrong with the rail(s).
That may also be the case.
I have a small HO set up in my basement to help wait out the winter and I have one of the first Thomas models sold(from the first year they were released) and when I tend to jack up the power he is constantly flying off the curves. I chose not to run him anymore so I don't damage him. I liek to run the trains at a 70 MPH speed and Thomas can't seem to handle that with out constantly flying all over the place. I have an old controller, the black base with a red nob, so the speeds on the new controllers may be different.
I forgot to switch the trackand he fell of the track
thank you for the information
tim
i also a ho set in my basement
I got for christmas is bill and ben !!!!! :D :D
So Thomas flew off the points? Maybe something was wrong with the points. Thomas is a light model, so if anything is sticking up, he will tip over easier. The same thing happened to me while running one of my many Bachmann LS 4-6-0s. The cow catcher hit the points and the engine "jack knifed" into the air and landed on its side. I removed the cow catcher and now it is just fine.
And no double posts. >:(
Give him a break, it is his first creating a thread. I have no idea why people constantly spaz out because someone double posted for the first thime. You act they they just shot a person :P
if you try to go through a switch that is set against your train, thomas will derail. most trains will. the solution is very simple. make sure that you have the proper route set for your train.......
that said, if you feel like wiring, you can add a signal or other indicator to show you which way the points are set.
https://secure.atlasrr.com/mod1/itemdesc.asp?ic=0200&eq=&Tp=
the atlas snap relay is wired in parallel with your remote switch motor, and provides contacts that can be hooked up to a signal, or a panel light.
I am gonna send bachmann my thomas ho. So i hope he can fix it.
Tim
Well what is wrong with him? Did he break? If he didn't, don't bother sending him in. Try running him again over the spot of track where he derailed and if he derails again try turning him around and if he does not derail, problem solved. If he just derailed, he is fine, but if something else happened to him that caused damage then send him in.
-BRR
I gave it another chance and he is still wobbly,but the good thing is it is not falling off the rails any more.
tim
Quote from: ClearwtaerMK2 on January 29, 2011, 05:38:00 PM
And no double posts. >:(
dude chill none did this to zts in his modelling tread.he's kinda new here too just like me gosh youve done it to both of is in our first thread and both of mine I had to lock to aviod argument the dtst tread I had to delete probably cause it was a train wreck (thank you anoynmus user >:()
Quote from: BillingsRR on January 29, 2011, 06:01:11 PM
Give him a break, it is his first creating a thread. I have no idea why people constantly spaz out because someone double posted for the first thime. You act they they just shot a person :P
I know, right. Mk2, please calm down, he didnt mean any harm
caim down mk2
My dad fixed the train, now it works great :D
tim
Quote from: ClearwtaerMK2 on January 29, 2011, 05:38:00 PM
And no double posts. >:(
when i was new, i did a triple post, and someone KINDLY, told me not to triple post, so maybe you should say it nicer too