Are these all lighted or  just some?  Is there a number series that specifies lights?  Just wondering if Bachmann always put lights in these cars.

For 72' cars and 85' cars.
Thanks

How hard is this?  The tabs hold the shell tight and am wondering how this shell comes off without breaking these tabs.
Thanks

What is the correct size of pictures if I want to show some?    I tried before and was rejected because they were too big.   The error pops up saying 192KB is the maximum size.  How does this compute on my camera's image mode, say 4000 x 3000?

I used latex caulking to avoid cracking.  I smoosh it on with wet brush on top of the dried plaster cloth.  So far, so good!

My LHS increased the volumes.

   Just saw this old post so here's my answer.      http://www.bachmanntrains.com/home-usa/board/index.php/topic,32867.msg243221.html#msg243221

Saw this advertised and I wonder how good a job it does.  Anyone have one ?  Like it?   I know nothing beats elbow grease but we all could use some help....so how is this?

Thanks, John2.  I'll take it to place I bought it from.  He can do that. 

It is a Soundtrax but I only have the EZ Command and can't make those adjustments with the EZ Command.

I have a Bachmann DCC Sound RS3 and the sounds volume is not as loud as my others. I have EZ Command.  Anyway to increase the volume?    Tnx

Thanks, Bach-man
Got it off.  Problem was the swivel bar catching on the corner of the chair piece that sits on the weight.  Filed it down so it wouldn't catch.  All set now.

I've had great service twice with warranty repairs.  They replaced an EZ Command throttle  when the dial was sticking and recently repaired a DCC diesel that wouldn't move.  The service was great and the turn around time from when I sent it to when I got it back was about a week!

I just got this Spectrum Passenger car and 1 truck will just kinda lock, not move sideways like something is stuck. It is slight but enough to derail on a curve or turnout. Problem is, I can't see anything in there.  This is the truck that's connected to the coupler where they both move in unison.  The other truck seems ok.   Was/is this a problem with Spectrum passenger cars or just a random bad truck?  The shell seems like it's on there pretty good so I don't know how to look inside.

Are the tabs underneath the shell easy to open it with?

Took off the front pilot.  Kept bouncing off on some turnouts (Peco).   No problems now