Print Page - Upgrade gp40 and F7

Title: Upgrade gp40 and F7
Post by: machali1554 on March 23, 2016, 11:38:40 AM

I need upgrade two loco DC to DCC: EMD GP 40 and F7. Is possible to use E-Z Command two función decoder?
Thanks

Title: Re: Upgrade gp40 and F7
Post by: bapguy on March 23, 2016, 12:36:23 PM

Are they DCC ready? If they are they should have an 8 pin plug for a decoder. If not, you have to hardwire them in making sure the motor is isolated from the frame. You may want to check out the NCE decoder for Bachmann locos. These are a much better decoder Joe

https://ncedcc.zendesk.com/hc/en-us/articles/200945019-BACH-DSL

Title: Re: Upgrade gp40 and F7
Post by: machali1554 on March 23, 2016, 01:25:13 PM

Ok, Thanks you. I will study your suggestion quickly

Bachmann Online Forum

Discussion Boards => HO => Topic started by: machali1554 on March 23, 2016, 11:38:40 AM