Help I had the red wire for the rear light come off the circut board and I do not know where to solder it back on.
Get a Optivisor or other magnifying glass and good light source. The spot will be very evident. You will need a fine point tip soldering iron.
In the below link you can see there are labels on the PC board. Yours should have similar labels.
http://www.tcsdcc.com/Customer_Content/Installation_Pictures/HO_Scale/Bachmann/Bachmann_Spectrum_USRA_Light_2-10-2/Bachmman_Spectrum_USRA_Light_2-10-2.html
Rich
Rich,
Thank you for the information. I got it soldered on with no problem,
Al
Quote from: boxcarbuz on March 03, 2014, 08:46:26 PM
Rich,
Thank you for the information. I got it soldered on with no problem,
Al
Very good.
In case you are interested, I Googled bachmann ho 2-10-2 pc board and that link was near the top of the list.
Save it in Favourites. There is info on other Bachmann locos also and some Bachmann locos sold on the other side of the Pond.
Rich