Text only | Text with Images

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: traintronic on August 26, 2014, 03:03:10 PM

Title: reset to factory setting of Bachmann DCC decoders
Post by: traintronic on August 26, 2014, 03:03:10 PM
Hello,
I have several Bachmann locomotives with DCC. ( EMD FT A units, Baldwin Sharknose A & B units) After programming the address to a number other than 3, the locomotives no longer run on regular DC. How do I set the decoders back to factory default?  Some other decoders are reset by programming CV 8 to a value of 8, but that doesn't seem to work with the Bachmann decoders. I use MRC Prodigy Express.
Title: Re: reset to factory setting of Bachmann DCC decoders
Post by: bapguy on August 26, 2014, 03:41:47 PM
Try CV8= 33     Joe
Title: Re: reset to factory setting of Bachmann DCC decoders
Post by: traintronic on August 26, 2014, 03:45:16 PM
Joe , Thank you for the reply. I will try CV8 =33
Don
Text only | Text with Images