Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: hgottfried on December 11, 2015, 10:29:19 PM

Title: New Bachman Baldman L&N 4-4-0 Steam loco DCC-Sound
Post by: hgottfried on December 11, 2015, 10:29:19 PM
My new Bachman Baldman L&N 4-4-0 Steam Loco DCC-sound that I just received is not running the DCC Sound is working. The tracks are clean all my other engines are working. Is there something I can trouble shout to find the problem or will it be necessary to send the engine back?
Title: Re: New Bachman Baldman L&N 4-4-0 Steam loco DCC-Sound
Post by: bapguy on December 12, 2015, 08:43:44 PM
Make sure the 2 plugs between the tender and loco are in all the way. Are you running this on address 3? It's the default address from factory.    Joe
Title: Re: New Bachman Baldman L&N 4-4-0 Steam loco DCC-Sound
Post by: Searsport on December 14, 2015, 04:43:12 PM
Hi, it is dual mode, so try it on DC if you can just to see if it runs.

Best Regards,
Bill.
Text only | Text with Images