I am lost with the smoke unit. Driving the Climax under DCC, the sound is excellent, but HOW to switch on the smoke unit ?
I am looking for a F (function)- key to switch on/off.
In the description; technical reference as well in the Steam Sound user's guide i don't find any advice.
Maybe i have overwritten, sorry for this, but I need an advice.
Looking forward
Juergen

Hi all together,
I want to upgrade my Shay with a DCC decoder. Before simply cutting all wires, i would prefer to use as much as possible of the wires by knowing their "direction / function".

I need the schematics of the G811X-PCB01

Seems to be I have an old version of the Shay, at Bachmann I find only the newer Version ready for download. (G821X-PCB01). However the actual wiring of my Shay is complete different. E.g. almost no color coding (mostly red and black plus 2 white an done yellow cable).

Maybe someone can help me ?

Regards from Bavaria   

Sincerely
Juergen

Hi, maybe some of you folks can help. I have the Mogul 2-6-0, where the loudspeaker is in the tender, today i installed the DCC unit and did not find the cable for the loudspeaker. In the Bachmann DCC wiring connection I see two wires connected to a 2-connector, and the schematics says SOUND CAM. I do not find any instruction of the loudspeaker wired and how to connect with the locomotive.
- is there a pre-installed wire i do not see ?
- if i use the SOUND CAM instead and connect to the 2-connector, where is the connection (maybe soldered) on the board G814X-PCB01 ?
- or am I looking totally wrong ?
Anyhow, looking forward to all of you to help me here.
Thanks in advanced

Juergen
(Sorry for my Englisch, just learned it in school. Greetings from Germany)