I'm looking to get inside a Bachmann John Bull fo rmy Dad. Unfortunately, I have the engine, not the paperwork. But I can't ficure out how to pull the tender off the chassis. (Motor's in the tender) It needs to be cleaned, and if there's room, wire and stash a Z decoder somewhere, or maybe stick it under the boiler of the Bull or in a coach. I've tried flexing the sides, and the screw is out of the drawbar. it don't want to budge
hope this will help
http://www.hoseeker.org/assemblyexplosionbachmann/bachmannjohnbullpg2.jpg (http://www.hoseeker.org/assemblyexplosionbachmann/bachmannjohnbullpg2.jpg)
The indirect approach, but yes, that helps alot. Thank You, it's apart
Quote from: Flashwave on June 17, 2009, 01:54:55 AM
The indirect approach, but yes, that helps alot. Thank You, it's apart
well if it's like mine, you have to remove the bar holding the wheels. I forgot what it's called :(. the screw is between the wheels. i think you might want to ask
A.Bachmann
B.your local hobby shop
C.hopefully another member knows
I am not sure and don't want to guide you to
accidentally ruin your Dad's loco. It's a beauty on the rails. So try some of these and hope this helps!