I am working on an Athearn DD40 and am in need of a hand rail set. Is anybody out there that can lead me to a set, or at least some that could be retro fitted?
You might find some here.
http://www.discounttrainsonline.com/HO-Scale-Detailing-Parts-and-Decals-Athearn/HO_DET_140_4.html
Yampa Bob
Appreciate the info. I checked the site out and there is no DD40 rails listed. Someone told me about a year ago that there was another model that its rails would work on an Athearn DD40. I can't remember which one. Do you know which one he was talking about? I got a Spectrum DD40AX with the handrails and I compared it and seen those type wouldn't fit. Of coarse the Spectrum AX is about an inch and a half longer than the straight DD40.
I understand that the DD40AX is two GP40s on one frame. You may be able to modify some GP40 handrails. I noticed on Walthers that they have handrails from Smokey Vally RR Products for a GP40. They are specifically for a Bachman GP40. The part # is 676-12.
Omaha
I have been checking out GP40 handrails and they would appear to work. The only problem is Smokey Valley wants as much for their handrails as I can get the entire engines for! Maybe I can find some junk GP40s with good handrails.
Chuff
Athearn has many styles of stanchions only, you may have to bash what you need. If you can get the proper stanchions, the actual rails can easily be made with .015 or .020 phosphor bronze wire.
One site has special brass shapes made by K&S that you won't find in hobby stores,even brass tubing down to 1/32".
http://www.specialshapes.com
What would be the difference between GP40 and GP40-2, as far as for the handrails?
Should be none.