where on u tube can i find how to lube bachmann gp40 with dcc sound
https://www.youtube.com/watch?v=OtW8Gx_WxL4
How are the trucks attached? I am afraid of breaking the trucks by prying with a flat head screw driver. Are they held on with a clip thanks for your help
fzip, if your Bachmann GP40 is HO then
Click Here (http://www.bachmanntrains.com/home-usa/dwg/dwgs/HOEMDGP40(DCCSOUNDVALUE).pdf)
fzip - give the Bachmann service department a call. They will be happy to help.
http://www.bachmanntrains.com/home-usa/service.php
Quote from: fzip on February 15, 2017, 06:25:00 PM
How are the trucks attached? I am afraid of breaking the trucks by prying with a flat head screw driver. Are they held on with a clip thanks for your help
Use a small flat screwdriver on the clip towards the middle of the loco on each truck. Lift and pivot towards the end of the loco and it should come right off. When replacing, reverse the operation. Get the end in place first, then pivot the inside end of the loco bottom down until it locks in place. The latch towards the ends of the loco are smaller, and more likely to break if you pry them.
Len
Thanks, it works I watched the video and done as ken recommended and it came right off. Thanks again