The EZ Command manual says this about running a DC loco on Button #10:
"NOTE: WHEN OPERATING A DC LOCOMOTIVE ON ADDRESS "10," BE SURE TO MONITOR IT CLOSELY. SOME
DC MOTORS ARE SUBJECT TO OVERHEATING AND DAMAGE WHEN OPERATING FOR LONG PERIODS OF
TIME ON DCC SYSTEMS."
I have tried for the first time to run my C&S 2-6-0 #22 (from a very early On30 set) using 10, and it will run, fairly smoothly, BUT the motor (I guess_) makes a high-pitched buzz/hum sound that sounds almost like a whistle.
Is this sound telling me that I should not run this DC loco using the EZ Command?
Thanks for any info!
"NOTE: WHEN OPERATING A DC LOCOMOTIVE ON ADDRESS "10," BE SURE TO MONITOR IT CLOSELY. SOME
DC MOTORS ARE SUBJECT TO OVERHEATING AND DAMAGE WHEN OPERATING FOR LONG PERIODS OF
TIME ON DCC SYSTEMS."
I have tried for the first time to run my C&S 2-6-0 #22 (from a very early On30 set) using 10, and it will run, fairly smoothly, BUT the motor (I guess_) makes a high-pitched buzz/hum sound that sounds almost like a whistle.
Is this sound telling me that I should not run this DC loco using the EZ Command?
Thanks for any info!