Can I run my traffic signal lights on a just plug light hub?
Please be more specific.
Rich
Quote from: My ctrains on January 06, 2020, 05:52:44 PM
Can I run my traffic signal lights on a just plug light hub?
Short answer: No.
You may be able to do something with the NCE "Illuminator" if you're using DCC:
https://9cc98664-5351-4429-8f03-decc4f86b107.filesusr.com/ugd/f2c702_45ac361dbf67420f947559ddc4c54c9c.pdf
Or you might be able to use the Walthers traffic light controller:
https://www.walthers.com/traffic-light-controller
If you solder, a little searching on the web will also find a number of circuits you can build yourself.
Len
I should have guessed.
If you can do your own, this guy has a lot of stuff. I have bought from him some years ago and his circuits work. I use to love working at this level.
http://www.circuitous.ca/CircuitIndex.html#Signals
Rich
What type of traffic lights? You would think Woodland Scenics would also do traffic signals for their Just Plug system but they don't yet.
They have a sequencing hub but it wouldn't cycle individual lights in one unit like red, green, and yellow.
https://woodlandscenics.woodlandscenics.com/show/category/JustPlugLightingSystem (https://woodlandscenics.woodlandscenics.com/show/category/JustPlugLightingSystem)