Print Page - Attaching EZ Track to foam board

Title: Attaching EZ Track to foam board
Post by: Penn1974 on May 13, 2015, 04:47:51 PM

I have read the posts on attaching HO EZ track to Styrofoam with the Lowes shure tape. My question is what width to use because the 1.44 does not seem to attach much of the track roadbed. Should I go to the 1.88 shure tape to grab more of the track roadbed?

Title: Re: Attaching EZ Track to foam board
Post by: Jerrys HO on May 13, 2015, 10:30:33 PM

I use low temp hot glue for gluing my track but if I were to use shure tape I don't think it would hurt to go a little wider than the track itself. You can always trim it or use the extra adhesion for ballast or scenery material.

Title: Re: Attaching EZ Track to foam board
Post by: the Bach-man on May 13, 2015, 11:02:42 PM

Dear Penn,
Go wide!
Have fun!
the Bach-man

Title: Re: Attaching EZ Track to foam board
Post by: Penn1974 on May 14, 2015, 12:00:39 PM

Thanks

Bachmann Online Forum

Discussion Boards => HO => Topic started by: Penn1974 on May 13, 2015, 04:47:51 PM