News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - RRPETE

#16
On30 / Heisler Prototype?
April 13, 2013, 08:47:55 AM
What prototype was used for the Stearns Heisler?

Thanks.
#17
On30 / Re: on30 forney
February 19, 2013, 02:28:46 PM
There could also be a problem with alignment of the running gear. The yoke that connects the cylinders is a little flimsy and prone to cracking, which can leave the cylinder(s) misaligned. Check to see that both cylinders have the same alignment. If not, try some way to clamp the misaligned one while gluing it in place. I have done this with success on one of my Forneys. Also check for bent or misaligned connecting rods, etc.
#18
On30 / 18' car prototypes?
February 08, 2013, 08:22:08 AM
What prototype was used for developing the new 18' cars?
#19
On30 / Re: Warranty?
November 03, 2012, 08:40:31 PM
No problem. I just can't find a warranty statement in the box or on the web site. Is there one?
#20
On30 / Warranty?
October 31, 2012, 01:45:09 PM
Does Bachmann offer a warranty for rolling stock?
#21
On30 / Reefer prototype?
October 31, 2012, 01:44:32 PM
Can anyone identify a prototype for the Bachmann Billboard Reefers?
#22
On30 / On30 2-4-4-2 Prototype?
September 16, 2012, 09:31:06 AM
What prototype does the new 2-4-4-2 represent?
#23
On30 / Re: On30 Porter Prototype?
August 31, 2011, 04:57:02 AM
Quote from: Hamish K on August 29, 2011, 08:37:41 PM
I doubt that there was a single prototype for either the 0-4-0 or 0-4-2 Porters, rather they are' probably "catalogue locomotives" i.e. based on the offerings in the manufacturers catalogue rather than on a specific example. These small Porters were supplied to a large number of operators, both in the US and other countries. They were made in several different gauges. For an American 30 inch gauge example see http://on30center.com/on30/library/articles/emrr/eureka.html For a Mexican 30 inch gauge 0-4-2 see http://www.mexlist.com/penoles/photo19.jpg

Hamish
0
Thanks.
#25
On30 / On30 Porter Prototype?
August 29, 2011, 09:33:45 AM
What is the prototype for the On30 Porters?
#26
On30 / 2-6-6-2 Sound phasing
December 26, 2009, 01:00:00 PM
Just got the new 2-6-6-2, and am curious about the chuff sound phasing. I was expecting the chuffs to go in an out of phase as the locomotive progresses down the track, but the two sets of engine sounds seem to stay locked in phase. I couldn't find anything in the Tsunami CD about it. Comments, anyone?

Thanks.
#27
On30 / 2-6-6-2 SOUND
November 23, 2009, 12:53:38 PM
Is the sound in the 2-6-6-2 articulated or simple?
#28
On30 / On30 version of the large scale 2-6-6-2T?
April 10, 2009, 12:20:20 PM
Does Bachmann have any plans to bring the 2-6-6-2T to On30?
#29
On30 / On30 Freight car prototypes
January 05, 2008, 09:40:35 AM
Where can I find information on the Bachmann On30 freight car prototypes?

Thanks.
#30
On30 / Re: Bachmann On30 Track Cleaning Car Info?
January 02, 2008, 07:53:23 PM
Thanks. That's one of the places I saw it, too. Google finds the company via a telephone number search, but the link from there to the web site doesn't work, so it's still a mystery. ???