Print Page - Peter Witt bac84652

Title: Peter Witt bac84652
Post by: Bmk on August 06, 2012, 08:10:27 PM

I have a Peter Witt BAC84652 and trying to change the decorder address from 03 to 6319.
Can someone please provide the CV decorder list.

Thank you
Brian

Title: Re: Peter Witt bac84652
Post by: Ken G Price on August 06, 2012, 11:23:50 PM

What system? If an EZ then you can not do it.

Title: Re: Peter Witt bac84652
Post by: Bmk on August 07, 2012, 07:17:10 AM

I run JMRI DrcorderPro with a Digitrax DB150.

Title: Re: Peter Witt bac84652
Post by: seadowns on August 07, 2012, 08:30:30 AM

Hi!

You need to program CV17 and 18 for long adress and CV29 to enable the new long adress and to disable short adresses.
How your certain system handles this operations is way out of my knowledge but most of the DCC-systems can do such changes with just one step.
So RTFM for programming a long adress and good luck!

Regards
Mathi

Title: Re: Peter Witt bac84652
Post by: skipgear on August 07, 2012, 02:11:55 PM

If you are using JMRI, can you read the decoder?

The Bachmann decoders program just as any other. They are limited in functionality but the basic CV's are there. You should be able to program it directly with your digitrax throttle and it will set CV29 accordingly.

JMRI should recognize the decoder as a basic Bachmann or Lenz decoder.

Bachmann Online Forum

Discussion Boards => N => Topic started by: Bmk on August 06, 2012, 08:10:27 PM