Can someone help? I would like to build a figure 8 using Bachmann 18 in. curve EZ track. How many curves, straight(what length) and 90 degree crossing (which size) should I buy? Figure 8 should be as small as possible as my space is limited.
Using a 30 deg crossing, a figure eight requires 22 pieces of 18" radius track. That's 11 per side. 11 pieces is one piece shy of a complete circle. So a figure eight constructed this way would be slightly larger than two 36" circles side by side and would be the smallest configuration possible. Here's the 30 deg crossing:
http://www.bachmanntrains.com/home-usa/products.php?act=viewProd&productId=192
I haven't found anything yet for using a 90 deg crossing but I know it requires some straight track pieces. Try googling "bachmann ez track figure 8" or something like that.
Robert
Thank you for your response.
Check this out, perfect 8
Bachmann 44493 HO Steel EZ Accessory Set
http://tinyurl.com/y9j9wjx
Martinoff,
How much length and width do you have? I assume you want a level figure 8 with a crossing piece.
Sincerely,
Joe Satnik
This site might help you. They show a figure 8 with a 90 degree cross and a lot of other fun features. May give you ideas for something a little more complex.
http://www.thortrains.net/marx/funlayez2.html
Have fun.
Peter.