Bachmann Online Forum

Discussion Boards => HO => Topic started by: mr_mahoney on July 06, 2008, 09:21:41 PM

Title: Need a gear for a 4-8-4 Niagra
Post by: mr_mahoney on July 06, 2008, 09:21:41 PM
I need to find a gear that is driven by the motor pinion on an older 4-8-4 Niagra Steam Engine.  This plastic gear also has a smaller gear around the center.  Where can I find a replacement?  Are there other models that use the same gear?

It is the favorite engine of a retired preacher that lives in my neighborhood and I would really like to get it running for him.  I have already dismantled and cleaned the motor and now need a gear.

I appreciate any help.
Thanks, ;D
Title: Re: Need a gear for a 4-8-4 Niagra
Post by: the Bach-man on July 06, 2008, 10:55:46 PM
Dear Mr. M,
It's unlikely that there are any gears for an older 4-8-4, but call the service department tomorrow to make sure.
Have fun!
the Bach-man
Title: Re: Need a gear for a 4-8-4 Niagra
Post by: jayl1 on July 10, 2008, 08:06:42 PM
If the part is not available (it is a very old engine)  you might try Northwest Shortline for a part.  Bowser also makes a complete remotor kit that uses your engine shell.  The bad news - it retails for about $80.