Title: Twin speakers in 16VC tender
Post by: Ozzie21 on June 28, 2008, 08:11:16 AM
Post by: Ozzie21 on June 28, 2008, 08:11:16 AM
I decided to couple a 16VC tender to one of my C&O H-5's. Some H-6's were coupled to 16VC tenders so I still have a bit of work to do on the loco. I'm using the sound decoder from the standard tender. I'll install this when I make up a new interface and change the LED's to Golden whie ones.
Here are some pics of the speaker install so far.
Chassis opened up for the speakers.
Speakers test fitted.
Speakers mounted and sealed with latex caulk.
Starting to wire up.
End seals made from 60thou plastic card affixed with latex caulk.
When I get the wiring interface sorted out I'll post some more pictures.
Charles Emerson
Queensland
Australia
Here are some pics of the speaker install so far.
Chassis opened up for the speakers.
Speakers test fitted.
Speakers mounted and sealed with latex caulk.
Starting to wire up.
End seals made from 60thou plastic card affixed with latex caulk.
When I get the wiring interface sorted out I'll post some more pictures.
Charles Emerson
Queensland
Australia