I have two Spectrum outside frame 2-8-0s and I am very careful about how they are handled and how I run them. Engine #1 stripped the "drive" gear. Sent it to Bachmann and it was fixed for $50.00 plus my shipping. Now engine #2 has same problem. Anyone have any experience fixing this problem? I have heard it is not an easy job, but I am not afraid to tackle it if I have a little guidance. Any advice is most appreciated.
Howard
Howard,
I have a Motor and gearbox kit for the Bachmann Connie. Email me and I will send you an order form and a descriptive piece on it. The first production run is sold out and I am working on the second run.
The axle gear can be repaired, using the right sized brass tubing and epoxy.
Barry - BBT
Howard,
I tried to modify the above message:
email barrysbigtrains@earthlink.net 623-936-6088
Also the kit is user installed and warranted for the rest of my life, just as everything else I have made.
Barry - BBT
Northwest shortline has a metal replacement gear for about $12.
I have six 2-8-0 and only one of the newest ones got broken gear shortly after being put in service. (knock on wood)
Stan
Stan,
Thanks for the reply and the info about a Northwest Shortline replacement. Have you ever installed one?
Howard