I have some old part numbers I need to see if they are available. These were purchased under these #'s on 12/10/2013.

Fr Mid & R Driveline w/Gears(80 ton 3 Shay) Ho scale  H81912
"O" ring (HO Shay)                             819XX- H81913
Front Truck Driveline (Climax) HO Scale               OAH04
Rear Truck Driveline  (Climax) HO Scale               OAH05

These are directly from the packing slip.

I have 2 different NCE set ups, one is for just programming, the other is used for running trains. I have tried using both. I have reset to 3 multiple times. I have tried using combinations of the cab number. I just programed another loco and it worked just fine. I have a tester to see if decoders are bad but not sure if removing and testing will void warranty.

Thanks for the replies and for things to try, Butch

I am using a NCE system. I have had it for several years. I programmed 2 other Bachmann locos on the same day. They both had light and idle sound when placed on the DCC main line, this one does not do that.

Factory decoder installed. Let sit a few days , ran trains on main, set on main entered 3 no response. set on DC track lights, sound, runs perfect. Reset according to bachman specs.

I have a FA2 that is new. It works fine in DC but wont do anything in DCC. Tried resetting to factory specs and #3 but still nothing, I programed several others at the same time and had no issues. Normally a new loco will sit and idle when set on a DCC track, this one does nothing.