Has anyone put a decoder in a rail truck?
I have tried digitrax, massoth and massoth m decoders with out
Any real success. In all cases the motor goes from stop to full speed in 1 step, reacts real slow
And will not run reverse. I tried to lower (cv 5) max speed but no change.
I have never had this problem with other engines.
Suggestions????
David
Take a look here:
http://girr.org/girr/tips/tips8/bachmann_railtruck_tips.html
The problem was the Bachmann wiring diagram is incorrect.
I had to wire the decoder direct to the motor and not through the
Connections shown on the diagram. The fix is documentated
On Greg Elmassian's site.
David