Hi! I saw a forum thread some years ago on how to make water effect using toilet paper and glue. I have tested this method and was very happy with the result, so I made a short video showing how it´s done. See link below.
(http://www.xn--mrklintg-0zaq.se/anlaggningar/12-22/stummi/watereffect_12.jpg)
I think this method is close to "fool-proof" in getting a good and realistic result. It´s also obviously a very low cost method, so I thought it was a good idea to spread this method by making a video tutorial. I hope you like it.
https://youtu.be/2TwpB7sVMn8 (https://youtu.be/2TwpB7sVMn8)
Now all is dry and last coat of varnish is done. :)
(http://www.xn--mrklintg-0zaq.se/anlaggningar/12-22/stummi/T44_i_seppan.jpg)
I made a small scratch built bridge from North Eastern Scale Lumber.
A short tutorial of how I did... ;D
https://youtu.be/kxwwHECCB7k (https://youtu.be/kxwwHECCB7k)
(http://www.xn--mrklintg-0zaq.se/anlaggningar/12-22/stummi/bryggan.jpg)
Here´s a photo taken more than one year after the water was ready. The color is still perfect. No visible ageing effects, like yellowish, or brown tones..
(http://www.xn--mrklintg-0zaq.se/anlaggningar/12-22/us_stuff/water_towboat.jpg)
Spectacular modeling! I bow in your general direction.
Regards,
Jonathan
Quote from: jonathan on September 14, 2017, 07:33:52 AM
Spectacular modeling! I bow in your general direction.
Regards,
Jonathan
Thank you Jonathan! :)
(http://www.xn--mrklintg-0zaq.se/anlaggningar/12-22/stummi/watereffect_2.jpg)