Text only | Text with Images

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: Chrisbenadie on March 04, 2014, 12:06:27 AM

Title: My new locomotive hums
Post by: Chrisbenadie on March 04, 2014, 12:06:27 AM
Hi
   Where can I find the decoder CV specs for EMD SD40-2 DCC ONBOARD decoder ,and can I use DECODER PRO TO program it.
The motor hum on start is not so good.
Title: Re: My new locomotive hums
Post by: Hunt on March 04, 2014, 12:34:09 AM
CV spec  Click Here  (http://www.bachmanntrains.com/home-usa/ez_content/1_Amp_Decoder_Instr.pdf) for HO DCC On Board.

Yes, you can use Decoder Pro to program it if Decoder Pro supported by your DCC system.
Title: Re: My new locomotive hums
Post by: trainmainbrian on March 04, 2014, 08:43:56 AM
Quote from: Chrisbenadie on March 04, 2014, 12:06:27 AM
Hi
   Where can I find the decoder CV specs for EMD SD40-2 DCC ONBOARD decoder ,and can I use DECODER PRO TO program it.
The motor hum on start is not so good.

If your Loco is Brand New out of the Box everything inside the motor are tight & just might need to be ran on your layout to break everything in. & your motor hum most likely will go away & not hum any longer.
Text only | Text with Images