Print Page - Large Scale Thomas

Title: Large Scale Thomas
Post by: pkhart on April 09, 2010, 08:56:48 PM

Hi,
I recently purchased a Large scale Thomas at the ECLSTS and I would like to install a DCC decoder in it so I can run him on my layout. My question is does anyone know what size decoder I would need because I can not find any information on the current draw. Also should I put the PCB on the motor side of the decoder or the track side? Any help would be greatly appreciated.

Thanks,
Paul

Title: Re: Large Scale Thomas
Post by: Nathan on April 09, 2010, 09:39:51 PM

Take a look at the thread 'Thomas??'

http://www.bachmanntrains.com/home-usa/board/index.php/topic,10876.msg95862.html#msg95862

Title: Re: Large Scale Thomas
Post by: pkhart on April 10, 2010, 03:48:10 PM

Hi Nathan,

Thanks for the help, I'll order a decoder today...Paul

Bachmann Online Forum

Discussion Boards => Large => Topic started by: pkhart on April 09, 2010, 08:56:48 PM