Print Page - Installing a Bachmann DCC Point

Title: Installing a Bachmann DCC Point
Post by: Kiwi42 on March 24, 2013, 08:09:28 PM

HI all

I have 2 DCC Bachmann points here from a friend that needs to know how to install to his layout, is there install instructions around please or will someone be kind enough to write back.

thanks kiwi42

Title: Re: Installing a Bachmann DCC Point
Post by: Bucksco on March 24, 2013, 08:42:17 PM

http://www.bachmanntrains.com/home-usa/ez_content/EZ_Command_DCC_Turnout_Instructions.pdf

Title: Re: Installing a Bachmann DCC Point
Post by: Kiwi42 on March 25, 2013, 01:17:07 AM

THANKS VERY MUCH

however I have now read this PDF, and remembered that he had a problem with his 1st Controller DYNAMAS Controller, changed over to a MRC Controller, got most other thing working but the points, so another now problem arrives, will try my Club Members for an E-Z Command Controller

Pg 2 has "Turnout Operation with an NMRA-Compliant DCC Controller", which nearly clears up his problem

Title: Re: Installing a Bachmann DCC Point
Post by: Kiwi42 on March 27, 2013, 01:52:39 AM

HI ALL

now have the 2 Bachmann points to a number - NOTEs were very confusing but then again it may have been me

bfn kiwi42

Bachmann Online Forum

Discussion Boards => HO => Topic started by: Kiwi42 on March 24, 2013, 08:09:28 PM