Will Bachmann ever reproduce the axle gears for the doodlebugs
I know of at least 10 people that need replacement gears for the doodlebug

Hi Len

That's no good

Thanks johnathan

Hi guys

I have been having trouble with my
Bachmann s2 with soundtrack dcc sound
The loco would move forward, and just stop
After removing the body of the loco I have found that three wires that are normally soldered onto the bogies of the loco were broken off due to no movement in the wire as the wire was pulled tight With no I stack , I resoldered the ire's back on, put the body back on the loco on the track and nothing when  I tried to fire up the loco, I tried a factory reset the decoder gets warm, the led headlights work, but nothing from the motor or speaker

Can somebody help me

I see bachmann parts team got,these parts in but didn't notify me that they came in and have gone out of stock again

So when will,these parts becoming back into stock

Is there any parts available for this locomotive, I couldn't find any parts on the Bachmann website

Im after the following parts and sent the parts department the following email


I purchased a Bachmann n scale 2-8-8-4 em1 double stack locomotive secondhand,

Due to poor packaging by the seller the tender draw bar was broken

I was wondering I could order the following parts for this locomotive

OADO4 tender draw bar
MT 11 and my 12
Screws 10450 x 2  and
N14x#mt16

A box for,the loco

I also need A copy of the brochure on the loco that Bachman includes with the loco

Postage will be to Australia

hi guys

if you are after parts for your ho and n scale loco listed below is what i have

part number   discription    what model in fits   model number   how many   scale
2985   gear sets   stream lined trolley   41-0629    1   ho
      brill trolley   41-0610      ho
   pancake motors   "Plymouth 0-6-0 41-0600
Streamlined trolley 41-0629
0-6-0 steam loco 41-0506
2-6-2 steam loco 41-0515
2-8-0 steam loco 41-0530
2-8-2 steam loco 41-0545
2-10-2 steam loco 41-0560
4-8-4 steam loco 41-0535
4-8-4 steam loco 41-0540
4-8-4 gs4 steam locos 41-0550
4-8-4 steam loco 41-0580
4-8-4 steam loco 41-1096
Plasser em80 41-0625
"      2   ho
3702   trailing trucks   41-1096 J class 4-8-4 and northern    41-1096 and  41-0580   3   ho
9872   valve gear   0-6-0 prairie class and 0-6-0   51-015 and 51-505   2   n
2021   couplers   all locos      5   ho
9873   gear sets   0-6-0 and prairie class   51-505  and 51-015      n
3059   wheels and gears   plasser em80c   41-0625   3   ho
2440    powered truck   f40ph diesel gp40   41-645 41-0635   1   ho
   valve gear   4-8-4 steam locos   various   2   ho
3064   cleaning pads   plasser em80c   41-0625   6   ho
   front pony truck      various   1   ho
   rear trailng truck      various   1   ho
2004   front pony truck   american 4-4-0   41-0510   1   ho
2957   gear sets   2-6-2 prairie class and 0-6-0   41-0515 41-506   10   ho
2976   wheels and valve gear with traction tyres   2-6-2 prairie class and 0-6-0   41-0515 41-506   2   ho
   complete bogies no motor   dd40x   41-065   4   ho
2606   wheels and valve gear with traction tyres   2-8-0 and 2-8-2 steam locos   410545 and 41-030   1   ho
3839   wheels and valve gear with traction tyres left hand cylinder only   4-6-0 royal scott      1   ho
9891   gear sets         4   n
9023   wheel sets with gears   0-4-0 switcher/   51-0547   4   n
9623   tender wheels   0-4-0 switcher/2-8-0   51-0547 and 51-0530   8   n
9641   complele bo-bo bogie         1   n
   gear sets         30   n
9636   wheels with gears         2   n
9634   worm drivers          10   n


if you have any questions please email me thanks

quentin

I see mth did the 2-8-8-8-2 in g gauge a few years ago

Quote from: union pacific 844 on January 21, 2013, 12:27:38 AM
i know bachmann pancake motors are  mostly  all the same
what are you working on?

Thanks for getting back to me, I have 4 pancake motors that new with a gear on them. Somebody in the forum is looking for one for a 4-8-4 steam loco

Thanks for the help

Quote from: jward on January 20, 2013, 10:10:28 PM
most of us here don't bother with poancake motors. they are poor performers especially when compared to the newer stuff.

Unless you can answer my question. Please dont post your personal comments here

Hi mr b

Would  bachmann interested in producing a bigboy or a 2-10-10-2 or a 2-8-8-8-4

Cheers

Quentin

Hello

Could you please advise what is the different between the old pan cake motors. How can I tell them apart?

What is the different between a 2981, 2974,2953, 2951, 3832, 3240?

Is the size of the motor that is different or

is it the the gear have a different number of teeth

Or is it the way the are wired up. I have of these motors brand new and I can't tell them apart

Please advise

Quentin Mclachlan

Hi I have 4 brand new never used pan cake motors for sale at present that may fit your older steam locomotives. Please email me


Have been notified that these motors will fit your 4-8-4
Thanks

Quentin