Just replaced broken gears on my Shay, early production w/factory DCC&Sound. Received parts on the morning of the 3rd business day! Impressed. What a value for the dollar. The "parts" I ordered were side frames, gears, shafting - or so I thought. What I got for $10 each, was a fully assembled side frame ready to screw onto the truck bolster. It even had the correct slip joints and universals already installed. Just a point of information, my Shay gave no evidence of cracked gears, it ran flawlessly. After reading another posting, I got curious, and sure enough, 4 out of 6 gears were cracked. I bought 3 sets, I don't think I'll be around for the change over of the third set! Anyone with these Shays and cracked gears, don't hesitate to get the B'mann side frames.
I just replaced the side frames on my Shay like you said, thanks for the advice. Like you said the service was great. It took a bit of time to change the frames but it was worth the effort. I'm glad I read your post. Now if I could get my Climax to work.
DCLLines - glad everything worked out OK. Can't help on the Climax, as I have not aquired one yet. When I do, it will complete my geared loco set.
Hi all,
I read this post and I went to the parts part of the site. I could only find 80 ton 3 truck Shay listed. Are there both 70 and 80 Shay? And if so, are the gear sets identical? Thanks
Barney R
I am just getting back into the hobby of HO trains. I really love the 3 truck Shay and wanted to buy one but after doing some research, it seems that there is a major problem with the gears cracking. Has Bachmann corrected the problem by replacing them with a better grade of plastic or metal gears?
Since the On30 and HO Shay's use the same drive train, the answer to your question is in a "General Discussion" forum sticky post here:
http://www.bachmanntrains.com/home-usa/board/index.php/topic,13307.msg107066.html#msg107066 (http://www.bachmanntrains.com/home-usa/board/index.php/topic,13307.msg107066.html#msg107066)
Len
Barney
I used them on mine, worked great
Thank you for the answer DCLLines.
In ref. to my original post, I went back and looked at the box, the Shay was actually 80 ton, not 70. Eyes are not what they used to be. Sorry for the confusion. The parts number I ordered was H81912. Dave
Thank You again DCLLines- I just ordered a set.