Text only | Text with Images

Bachmann Online Forum

Discussion Boards => Thomas & Friends => Topic started by: jayme on December 28, 2007, 10:55:46 PM

Title: thomas faces length
Post by: jayme on December 28, 2007, 10:55:46 PM
hey guy i've been off for a long time, but im back. my question is that im getting some thomas models later and im putting on some black clay over were the faces would be can any one tell me the length across the face (side to side) then (top to bottom).  thanks! 8)
Title: Re: thomas faces length
Post by: ThomasFan247 on December 29, 2007, 03:38:48 PM
it depends cos they all have different size faces.  :-\
Title: Re: thomas faces length
Post by: jayme on December 30, 2007, 12:55:38 PM
I just need the size for thomas and james. 8)
Title: Re: thomas faces length
Post by: StanierJack on December 30, 2007, 01:30:59 PM
Why not do it when you have the actual models? It makes more sense!
Title: Re: thomas faces length
Post by: jayme on December 30, 2007, 08:54:22 PM
yea true, but ive got the clay now so I would like to do it now while I have it. 8)
Title: Re: thomas faces length
Post by: ThomasFan247 on January 05, 2008, 10:54:20 AM
Thomas: little less than 3/4"
James: little more than 3/4"

hope this helps.  ;)
Title: Re: thomas faces length
Post by: HenryBlue on January 06, 2008, 02:09:51 PM
are you on about the diameter?
Title: Re: thomas faces length
Post by: jayme on January 08, 2008, 12:10:08 AM
thanks for the info appreciate it  :D
Text only | Text with Images