Ok thank you

When using an atlas diamond crossing and you intend on using dcc is there any special wiring needed?

Well i have the chasis and runs great i can get the older gp 40 for 6.00 this sunday. The engineis going to be repainted and used as a weathering test bed  and i need a non sound engine to run after people are sleep ing(long story) and the budget is barely existing.

Would the shell of one of the older gp40s fit  the chasis of a spectrum gp40?

Hello i have a bachmann ho scale sound value gp7.its been running great. I unplugged the controller and when i went to run the engine again i plugged the controller in  the sound was  great but the engine had no other functions lights  power etc.then it went flying down the track with no control. I unpleasant the power .next i plugged it back in just the sound works engine is dead does this need to be repeogrammed?

Hello I have a sound value gp7 am I able to swap out the shell for a sound value gp9?

Hello I have 2 bachmann dcc sound value gp7s and 1 ez command dcc controller I have a small 1x5 shelf layout what do I need to be able to have my son be able to run one engine while I run the other?

I have the ez command dcc set up am I able to have the dcc engine idling while I operate the dc engine and vice versa?

Would an ho scale atlas classic gp7 shell fit on a bachmann sound equipped gp7 chasis?

Can I use the dcc ez command to run a proto 2000 sound equiped engine?

With the dcc ez command am I able to run 2 dcc engines separetly like have one switching the other idling
And do I need block wiring like in dc? I'm building an ho scale 1x5 shelf layout.

hello i currently have the ez command controller wired to the layout , i created my own walk around cable with it and once i get my sound equipped gp7 i'm swapping over to the ez dcc comand using the same cable, my question is im going to be using normal dc snap switches, am i able to use a dc pack to operate the switch machine or am i able to run the switch machine wires to the ac terminals on the ez command?
thanks
mark

does bachmann offer the Boston and maine #1575 blue scheme in the dcc/ dc or just with sound?
thanks
Mark

i hope to purchase the ho scale bm gp9 sound value this one is offered in the blue version i would like to swap the blue shell with the maroon and gold shell of the non sound one, are you ablle to this with out any modifications.
ty
mark

i use wall mud and a putty knife.
mark