Got one these from MB Klein this afternoon.
From the diagram has the can motor like the 4-6-0.
My guesstimate is a 15mm diameter speaker facing downward in the tender.
Full Soundtraxx Economi with all the sounds.
Runs and sounds really great, am impressed.
Thanks Bachmann
Harold
Click Here (http://soundtraxx.com/factory/images/bachmann/pdf/2-8-0_N_AE32071.pdf) for the factory-installed decoder document.
This document content is different from the original factory-installed decoder Sound Value documents as it servers a different purpose, thus it is used differently.
Harold,
Read the decoder -
CV 50, F0(r) Hyperlight Auto-Dim Forward --- Verify CV50 factory default value is 144 (not 143 listed in document the factory-installed decoder document).
Just beginning to slip with this train:
All the cars have Fox Valley wheels.
Harold
Dug out an old analog 2-8-0 and that one wouldn't pull that train because of wheel slipping.
Harold
There is no working front coupler.
The usual answer to the front coupler is the MicroTrains Z-scale 905.
It worked but the front coupler is usually used for switching, the problem is the car being switched would "bobblehead" or "slinky".
With a little bit of fitting the McHenry coupler will work in the 905 coupler box.
Not for everyone, but works for me.
Harold
Using my highly inaccurate as far as measurement food scale but for comparison the modern cars are about two times heavier than a 40ft boxcar and about three times heavier than a 33ft hopper or tankcar.
Harold
Produced a short video, excuse the mess and lack of production values.
https://www.youtube.com/watch?v=o7Uaq2AhmnA (https://www.youtube.com/watch?v=o7Uaq2AhmnA)
Harold
There are some hidden sound functions not mentioned in the quick start booklet. F9 gives the grade crossing whistle and 10 through 19 offers a few more sounds. I think 16 is filling the tender with water. Very Cool! Now if you don't mind, please Mr. Bach Man could we have a Pacific with DCC and Sound too?