Please read the Forum Code of Conduct >>Click Here <<
Quote from: JonJet on April 21, 2024, 07:11:31 AMI have 50+ N-scale loco's...and 5 HO...
All the HO models are Bachmann GP40's and SD40-2's...but I cannot seem to get anywhere using CV 2/5/6 to speed match
I have CV2 at 10 - CV5 at 255
The AccutrackII shows the same whether CV6 is 50 or 150
Am I missing something???
Quote from: Fred Klein on April 14, 2024, 11:56:44 PMDave, my memory is a bit rusty since its been a while since I used my coupler height gauge. Yes, the two raised areas on the gauge are meant to go between the rails and they are a tight fit, as in you need to put one side in and then exert a little sideways pressure to seat the other side. They are definitely not a drop-in fit; they are supposed to be snug. One thing you might try is to mount the gauge to different pieces of track - some are looser than others due to normal manufacturing tolerances. Hope this helps.You were correct, got it to fit, thanks for the help.
Quote from: Mulfred100 on April 20, 2024, 02:48:18 AMAn 8 year old today would have been born around season 21 and look at the difference.
Quote from: thomasj219 on April 20, 2024, 08:52:40 AMYouTube makes that mandate irrelevant. Especially because the classics always do better. AEG was the final nail in the coffin for defending that mandate imo.How exactly? Mattel culled most of the episodes that were uploaded to different channels. If anything it's the polar opposite now. It's harder for people to find model series stuff.