Text only | Text with Images

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: Morgun 30 on June 02, 2013, 02:11:20 PM

Title: getting .75" ez track to join together
Post by: Morgun 30 on June 02, 2013, 02:11:20 PM
Sorry, I know this has likely been discussed, and I did look through the first five pages on the search, but what is the best way to get a .75" piece of ez track to join with another? Thnaks
Title: Re: getting .75" ez track to join together
Post by: Jerrys HO on June 02, 2013, 03:15:47 PM
Morgan
I usually cut the ends off of the small piece after I put a little ca glue on the ties to hold them on the roadbed while trimming the ends off.

Jerry
Title: Re: getting .75" ez track to join together
Post by: Joe Satnik on June 02, 2013, 06:51:56 PM
Dear Morgun,

See the quote from Hunt in this thread:

http://www.bachmanntrains.com/home-usa/board/index.php/topic,15728.0.html

Hope this helps.

Sincerely,

Joe Satnik
Title: Re: getting .75" ez track to join together
Post by: jbrock27 on June 02, 2013, 07:08:04 PM
Ahhhh, Joe, I thought all of "HUNTS" quotes self destructed with someone tried to read them  ???
Title: Re: getting .75" ez track to join together
Post by: Morgun 30 on June 03, 2013, 02:43:47 PM
thanks, Joe.
Text only | Text with Images