Bachmann Online Forum

Discussion Boards => HO => Topic started by: Speedbrake on January 15, 2013, 12:15:24 PM

Title: Reissue Spectrum 4-6-0s???
Post by: Speedbrake on January 15, 2013, 12:15:24 PM
Has Bachmann any plans for another run of the Spectrum HO-standard 4-6-0s high and low boiler with factory sound installed?
If so, is there a specific date?

I wound surely purchase a couple.
Title: Re: Reissue Spectrum 4-6-0s???
Post by: Sunshine Express on January 17, 2013, 06:20:30 AM
I agree,the Spectrum 4-6-0 with DCC and Sound is a fine loco.Just a comment,not a criticism,but it is the only steam loco that touches the side of my  side mounted Peco Turnout Motors ,coming out of small radius sidings.I watched this closely,and it is the very wide pilot. My layout is only 10x5,"Flatsville USA"rural town.
I found enough play in the turnout to ease it back just enough to clear this little fella,s pilot.
Heritage 0-6-0,Roundhouse 2-6-0,Spectrum 4-4-0,no problem on these tight places.
Old age forced me to use these easy to install turnout motors,which are not as robust as the original ones fixed under the table or hidden in small sheds.
Another good feature of this 4-6-0,is that it seems to ride smoothly over less than perfect track ,and does not derail easily. We all try to keep everything A1,but at 82, I am getting to love the simple "New Generation"of Sound DCC types ,Steam and Diesel. For instance my new Alco S4 Switcher,a real go anywhere into small places.
Yes Mr.B. although I have downsized,I think I would be able to sneak another 4-6-0 Spectrum into the roster ?
Owen
Title: Re: Reissue Spectrum 4-6-0s???
Post by: rogertra on January 17, 2013, 07:52:42 PM
I'm for a a few myself.  I missed out on the first runs.

Title: Re: Reissue Spectrum 4-6-0s???
Post by: electrical whiz kid on January 18, 2013, 08:33:55 PM
I could be moved to buy a couple of high-boilered  2-6-0s, especilly with sound.  Ho bout it , there, Bach-man?  Want to toss your lantern into the ring?
Rich C.
Title: Re: Reissue Spectrum 4-6-0s???
Post by: MilwaukeeRoadfan261 on January 19, 2013, 10:41:27 AM
I have one with factory installed DCC Sound and love it. I would get another one or two if they were re-released in other roadnames and configurations.
Title: Re: Reissue Spectrum 4-6-0s???
Post by: electrical whiz kid on January 20, 2013, 10:19:32 AM
I am curious about something:  How easy is it to convert a low-boilered ten-wheeler using-say-the old Patco lowering kits in reverse?
Rich C.
Title: Re: Reissue Spectrum 4-6-0s???
Post by: Searsport on January 21, 2013, 04:28:43 PM
I would welcome reissue of the unlettered high-boiler 4-6-0 with DCC & Sound, or even better, dressed up as a Western Maryland class G-7 4-6-0, with the Decapod type tender, not the USRA medium coal.  The G-7 cannot be too dissimilar from the Spectrum Baldwin, as they were built by Burnham Williams in 1906-7 and had 64" drivers.

TIA,
Bill.