I am building an N Gauge Layout and need to know the dimensions of the various EZ Tracks, where can you get this info?
On the Bachmann main page you can go to product search and select 'N' scale and then EZTrack and it lists info that may be of use.
The Duke....
It would be nice if someone (HINT HINT BACH MAN) would create a table for each eztrack curve product showing the arc as well as the radius for each section. In the catalog the 11.25" and 19" products have a note showing how many sections to create a half and quarter circle respectively. From that information one can determine that the arc each section is 30 deg and 15 deg respectively. How about for the other radii?
Here are the basic HO EZ-Track Pieces:
Number Description
44592E 0.75 inch straight (Part of 44592 Connector Assortment)
44592D 1.0 inch straight (Part of 44592 Connector Assortment)
44592C 1.25 inch straight (Part of 44592 Connector Assortment)
44592B 1.5 inch straight (Part of 44592 Connector Assortment)
44592A 2 inch straight (Part of 44592 Connector Assortment)
44513 2.25 inch straight
44512 3 inch straight
44514 4.5 inch straight
44511 9 inch straight
44584 36 inch straight
44505 R-15 30° curve
44501 R-18 30° curve
44531 R-18 15° curve
44530 R-18 10° curve
44503 R-22 22.5° curve
44532 R-22 11.25° curve
44519 R-26 18° curve
44506 R-28 18° curve
44504 R-33.3 18° curve
44509 R-33.3 12° curve
44508 R-33.3 6° curve
44507 R-35.5 18° curve
44561 Std LH turnout 30° curve
44562 std RH turnout 30° curve
44557 #4 LH turnout 15º diverging track
44558 #4 RH turnout 15º diverging track
44560 #6 righthand turnout 10º diverging track
44559 #6 lefthand turnout 10º diverging track
44569 #5 wye turnout ±6º diverging tracks
Len
Thought the OP was asking about N.
QuoteI am building an N Gauge Layout
Maybe Len has the same info on the N Scale trackage ?.
Quote from: James in FL on July 12, 2016, 07:18:47 PM
Thought the OP was asking about N.
QuoteI am building an N Gauge Layout
Maybe Len has the same info on the N Scale trackage ?.
Nope. I use Kato track when I work in N.
Len
if you download anyrail, they have a library for the n scale ez track which will show the radii and arc when you mouse over the individual piece. there are too many of them for me to list here but according to anyrail the full 12.5r, 14r and 15.5r sections are 30 degrees.
Should this not be on the 'N' scale forum?
Cheers
Roger T.