Print Page - Power booster and DCC command

Title: Power booster and DCC command
Post by: tim2009 on December 21, 2013, 08:28:16 PM

Hi folks. After my kids get so many different trains, I finally broke down and get the Bachmann power booster. I am having trouble on how to hook up the wires to the track. The wires come with the booster is bare on both side. I don't see where I can screw the wire in on the track. I have another set of wire which has a plug on one end and bare on the other end but it is much thinner than the one come with the booster. Is it safe to use those wires? Those wires come from Bachmann first train track set.
Thanks in advance.

Title: Re: Power booster and DCC command
Post by: ripvanwnkl on December 21, 2013, 08:53:29 PM

tim2009,

I've used the EZ Command red power wire with bare wires and black plugin to connect the booster to EZ track power rerailer for several years with no problems. See 2007 post discussion titled "Bachmann 5 Amp Booster" for more info.

Title: Re: Power booster and DCC command
Post by: Bucksco on December 21, 2013, 09:27:43 PM

http://www.youtube.com/watch?v=7Xb9w9on05g

Title: Re: Power booster and DCC command
Post by: tim2009 on December 21, 2013, 11:38:55 PM

Thanks for the information. Happy Holidays!

Bachmann Online Forum

Discussion Boards => HO => Topic started by: tim2009 on December 21, 2013, 08:28:16 PM