Just purchased the Walthers 130 foot turntable (not the DCC one) and found you need 2 inches below the turntable to install it. Is this true as I think it the same as the DCC one? Anyone install one yet. Nothing says this on the package or in the walthers catalog. Found it printed on the instruction sheet in the sealed box and don't want to cut the plastic packageing on the turntable to see the reason for the depth. Tough when you installing on a door. Any suggestions! Just thought I would ask as many here have installed this already. What is the advantage of the DCC turntable? Thanks Ron
It needs the depth for the drive, the DCC one is no different. I do believe that the Atlas turntable would work on a hollow door layout as it is powered by a hand crank on the surface of the TT (which can be replaced with an electric motor disguised as a metal shop building)....
Thanks , I bought this and than relized the DCC was being made and didn't know if the DCC had any advantages other than it running under a address like a loco. Ron
Quote from: Franz T on January 15, 2011, 05:51:13 PM
It needs the depth for the drive, the DCC one is no different. I do believe that the Atlas turntable would work on a hollow door layout as it is powered by a hand crank on the surface of the TT (which can be replaced with an electric motor disguised as a metal shop building)....
You can hook up a stationary decoder to the one you have and end up with the same result. It was done just to simplify things and revitalize the product for a new run.
Thanks for that info. Ron
Quote from: skipgear on January 16, 2011, 03:51:38 PM
You can hook up a stationary decoder to the one you have and end up with the same result. It was done just to simplify things and revitalize the product for a new run.