Text only | Text with Images

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: uncle timmy on December 08, 2015, 07:32:19 PM

Title: isolating ez track
Post by: uncle timmy on December 08, 2015, 07:32:19 PM
can anyone explain how you isolate  for circuit breaker ez track when you want to block wire for circuit breaker protection
Title: Re: isolating ez track
Post by: Flare on December 08, 2015, 07:39:22 PM
What scale track are you using?
Title: Re: isolating ez track
Post by: Hunt on December 08, 2015, 08:40:36 PM
Either
  1) Replace current metal rail joiners with plastic rail joiners (sold as Code 100 Insulated Rail Joiners)
  2) Cut gap in rail and fill the gap with plastic. Then trimmed plastic flat to contour of the rail
Title: Re: isolating ez track
Post by: Bucksco on December 08, 2015, 08:45:55 PM
http://shop.bachmanntrains.com/index.php?main_page=product_info&cPath=258_366_367&products_id=2495
Title: Re: isolating ez track
Post by: jbrock27 on December 08, 2015, 10:23:48 PM
In terms of plastic to fill the gap, styrenne is a piece of cake to work with.
Title: Re: isolating ez track
Post by: uncle timmy on December 09, 2015, 07:52:56 AM
im using ho scale track...dont i need a gap large enough so the wheels will not bridge the two rails?
Title: Re: isolating ez track
Post by: jbrock27 on December 09, 2015, 12:38:29 PM
Nope
Text only | Text with Images