Print Page - Blinking light

Title: Blinking light
Post by: Cortland on February 17, 2008, 08:58:03 PM

I asked for advice on how to cope with a blinking headlight on my Bachmann Spectrum 2-8-0 and most of the responses have nothing to do with this - off on other tangenst. I'm not interested in the merits of various DCC systems. I have an NCE Power Cab system and if there is away to solve this little problem by adjusting CV's I would like to know about it instead of everybody beating around the bush.The matter at hand is how to stop the engine light from blinking. Nothing else!

Title: Re: Blinking light
Post by: Tom Hogan on February 17, 2008, 09:01:26 PM

I replied under your post..................

Title: Re: Blinking light
Post by: Yampa Bob on February 18, 2008, 12:06:53 AM

Since you say it is not the track, then it must the CV or some other problem.

Read the manual again and adjust the CV.

If you didn't like the responses on the other thread, you should remove it and start a new one, instead of having 2 threads on the same subject.

Yampa

Title: Re: Blinking light
Post by: James Hail on February 19, 2008, 04:44:40 PM

I sent you links to all the decoder info......CV adjustments are key.

Jim

Title: Re: Blinking light
Post by: James Hail on February 23, 2008, 01:08:31 PM

My emails to you were rejected by your end.So you never received this info i sent.

http://jmri.sourceforge.net/xml/XSLT/pages/decoderIndex.html

http://jmri.sourceforge.net/xml/XSLT/pages/SoundTraxx_Tsu_Bachmann.xml.html

Try looking at the "Bachmann" tsunami files...may give you some help...

Title: Re: Blinking light
Post by: Santa Fe buff on February 23, 2008, 02:03:16 PM

I suggest you contact the service department. It might be a manufacturing error.

Bachmann Online Forum

Discussion Boards => HO => Topic started by: Cortland on February 17, 2008, 08:58:03 PM