I have a.75" straight EZ track section that has an issue. One of its track rails came off. What can I do to keep it in place? Can I put a little dot of glue under the center of the rail to hold it in place onto is EZ track base. What type of glue do I use just on the bottom of the metal rail and Ez track base to hold it in place so I can add the metal rai jointers and use it on my layout in between to straight Ez track pieces. Can anyone help me with my issue. Thanks! Roy
Roy, I've had that happen to me on N-scale EZ track with short sections and a couple of drops of CA glue on the roadbed under the rail solved the problem. Let the glue dry thoroughly, say an hour, and then, when you install the rail joiners, hold the portion with the glued-on rail so that the stress on the rail is minimal. Hope this helps.
Thanks Fred for the help!
Roy
Syracuse, Utah, USA