I have a Loco Item N°60812 H0 GP30 Diesel Loco DCC with a Digitrax DCS 50 Zephir.
My question is: the lights, forward and reverse, are in a low intensity, how can I do to
put both in high intensity ? Thanks
Click Here (http://www.bachmanntrains.com/home-usa/images/44913_Decoder_IS.pdf) for decoder instructions.
Program both CV 51 and CV 52
Programming the Bachmann decoder factory installed in the locomotive
A 1000 Ohm, ¼ Watt resistor laid across the programming track is required for CV read and programming a non-sound Bachmann (Lenz based) decoder used with a Digitrax Zephyr (DCS50) or Zephyr Xtra (DCS51).
Remove resistor after programming.
They should be default high intensity.Do a decoder reset.If not, there is a problem with the decoder, or the wiring connection to the lights .Contact the service department for warranty repair and or replacement.
Johnny