I have the EZ Command DCC system and a separate standard Bachmann DC controller with power pack, the gray one with black control knob.
Can I safely hook the DC controller to the EZ command and run a DC Bachmann F7 while running a DCC equipped Bachmann GP7 using the EZ command throttle for the DCC loco and the DC throttle for the DC loco??
Thanks You
No. You cannot have a DC and A DCC controller on at the same time. It is my understanding that you can run a DC locomotive with aa DCC controller, and you can run a bachmann DCC locomotive with a DC controller. Never try connecting the two controllers up tp the same track.
Dear Tonka,
Actually, you can daisy chain an analog pack with an EZ Command. Address 10 then becomes another DCC address.
Have fun!
the BAch-man
what the bach man mentioned involved connecting the dc pack to the ez command for use as a second controller, not connecting the dc controller directly to the track.
Do all DC controllers work with EZ Command or only ones made after a certain period? I have one that has the right connector cable but it doesn't run my DC engines when I turn up the speed control. Am I missing a step?