Print Page - Speaker size for 4-4-0 Locomotives

Title: Speaker size for 4-4-0 Locomotives
Post by: canpac on April 11, 2014, 02:31:00 PM

Wondering what size of speaker you would use for the Bachmann On30 Outside frame locomotive and also what size of speaker you would use for the Bachmann On30 Inside frame locative as well. I believe the correct Sountrax sound decoder is TSU-1000 Light Steam version( Decoder part #826101). Thanks

Title: Re: Speaker size for 4-4-0 Locomotives
Post by: richg on April 11, 2014, 02:53:43 PM

Right out of the SoundTraxx decoder selector. 28mm or 1.10236". Standard for many HO and On30 though not all.
Store the SoundTraxx website in Favourites.

4-4-0 American TSU-1000 Light Steam 826101 810054/ 810110

Rich

Title: Re: Speaker size for 4-4-0 Locomotives
Post by: canpac on April 12, 2014, 06:52:38 PM

Thanks a bunch Rich. Will do. Just didn't want to buy the wrong size.

Title: Re: Speaker size for 4-4-0 Locomotives
Post by: Steve Magee on April 14, 2014, 09:32:38 AM

Hey CanPac

Can you check that the o/f 4-4-0 already has a speaker in it? I received a nice surprise when I opened up the tender on mine, and lo and behold ...

Also the i/f 4-4-0 can fit a 1.22" HiBass is you want to use the TSU750 - it is a tight fit, but does go in there. I know the stories about heat failure on the 750s, but mine hasn't missed a beat in the 2 or 3 years it has been installed.

Steve Magee
Newcastle NSW Australia

Title: Re: Speaker size for 4-4-0 Locomotives
Post by: canpac on April 15, 2014, 05:08:00 PM

Thanks for the tip. Will have a peek. Hope things are well down under.

Bachmann Online Forum

Discussion Boards => On30 => Topic started by: canpac on April 11, 2014, 02:31:00 PM