Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: jccool5757 on April 13, 2011, 04:40:57 AM

Title: santa fe 2-10-4 new steam engine
Post by: jccool5757 on April 13, 2011, 04:40:57 AM
bachmann,
do we really have to take out the suppression capacitors OR (RF CHOKES)if  i
want to change decoders from Bachmann decoders to MRC sound decoder
and will it all work with out having problems on a DCC club layout !
With the capacitor still on circut board
                                                                  jccool57
Title: Re: santa fe 2-10-4 new steam engine
Post by: jonathan on April 13, 2011, 09:56:47 AM
JC,

I have installed digitrax and Tsunami decoders in my locomotives, without clipping the capacitors. One loco has the original Bachmann decoder.

I run these locos on our club layout with no problems (Digitrax system).

My home layout is DC.  I have clipped the capacitors on the locos that run on this layout.  This slightly improved slow speed running.  It was pretty good to start with.

Don't know if MRC does anything differennt.

That's my experience.  Others may have different experiences.

Regards,

Jonathan
Title: Re: santa fe 2-10-4 new steam engine
Post by: jccool5757 on April 13, 2011, 12:04:35 PM
jonathan,
thanks for the information
now i can start putting sound in my 2-10-4 santa fe engine ;D ;D
THANKS AGAIN
                              JC
Title: Re: santa fe 2-10-4 new steam engine
Post by: Pacific Northern on April 14, 2011, 02:49:32 PM
I found that as I replaced the standard Bachmann decoders with Digitrax. NCE and TCS decoders that some units would run erratic and others would not. I clipped the capacitors on all.
Text only | Text with Images