Need some assistance with programming a new Bachamnn Engine that I received last year, and just got around to converting my layout to DCC. The engine is DCC ready with the DCC board model H633Y+PCB01 Rev A. I am trying to program the engine to be DCC using a programming track using the Digitrax Zephyr DCS 051 and DCS 052 with no avail. I do see the code "D n A" on the screen of the DCS 051. I am not sure if it is the controller or the DCC board that came with the engine.
I have tried to have both the programming power and the rail power to the programming track and just having the programming leads from the controller. The engine does not answer to the CV code programmed in and does not respond to the default that I have found in my research (03). It only responds to the default DC control of 00 for the engine ID. Any assistance would be grateful in getting this resolved.
I have tried to have both the programming power and the rail power to the programming track and just having the programming leads from the controller. The engine does not answer to the CV code programmed in and does not respond to the default that I have found in my research (03). It only responds to the default DC control of 00 for the engine ID. Any assistance would be grateful in getting this resolved.