Yes, they are out. I have a video of my set on my YouTube channel  SRCJO1481
i believe the link is        HhZ806HSqKM

Lee, its a 21114. Oh im sure it will pull a lot more than what i have on it. i just wanted to put a load on it
to help it break in.
Thanks Chris

Lee, I cleaned the gear box out of the old grease and re lubed and reassembled the noisy truck.
Ran it for about 45 min strait in the direction it was making noise in.I have about 7 fright cars and a caboose. The loco is running very well without any clicking now.
I will do a video soon. I like to post to my YouTube.  If you like you can see them on my channel

SRCJO1481

Thanks Again Chris

Thanks Lee I will double check it again. I was wondering how long a break in period was. I know its just a rule of thumb. Gives me an idea.
Thanks, Chris

I just picked up a WBB Trainmaster. When I run it forward it runs fine. When I run it in reverse
one of the trucks makes a clicking noise. It seams to run fine but it clicks.
I have disassembled it and add a little grease to the worm and gear also checked for any
thing that might be in the Gear box.
Any suggestions?

Toys Rule!! 

I think i see what your saying 671. I plan on adding the Drop in sound system when they become available. I just don't want it to sound like a revved up dragster ready to drop the clutch before it starts to move when the motors are wired in series.  . Currently wiring in series helps with low speed , brighter lights and the horn or bell.

I was wondering if you had a older Williams Diesel that you have wired the motors in series.
How would this effect the Soundtraxx sounds? like the steps in the prime mover sounds.
for example a loco that is stock starts moving around 6 volts. a modified unit with the motors wired
in series starts to move around 8 volts.
Would the higher volts cause the rev to be higher?

Does anyone know when Williams introduced  the new truck style that is on the newer rolling stock?
Some on the truck frames come apart with the removal of four screws.that seams to be the newer style.
the others come apart by squeezing two tabs together to release the sideframes.

Stopped by my local train store today, Mario's trains.
Had a chance to see and hear the new GP-30
Very nice. Can't wait for more road names.

Can someone post a video? I would love to hear and see.

That's to Bad. looked like a nice loco. im sure it would have sold well.

What ever became of the new release of the Williams Mikado? I saw it featured in the 2011 TCA spring open house.

Can someone tell me the difference in the 44901 and the current 44902. Is the 44901 DCC?

What is the difference In The Bachmann 44901and 44902 ez command control