Text only | Text with Images

Bachmann Online Forum

Discussion Boards => Large => Topic started by: negley aspeling on March 20, 2011, 07:48:47 AM

Title: wiring diagrams for Revolution receiver in Yellow Pine loco
Post by: negley aspeling on March 20, 2011, 07:48:47 AM
I have acquired a Yellow Pine loco with wiring that has come apart and I would like to repair wiring.  Can anybody help? 
Title: Re: wiring diagrams for Revolution receiver in Yellow Pine loco
Post by: Loco Bill Canelos on March 20, 2011, 11:02:38 AM
In order to help, we would need to know which yellow pine locomotive you have.
Title: Re: wiring diagrams for Revolution receiver in Yellow Pine loco
Post by: negley aspeling on March 21, 2011, 05:55:50 AM
Firstly let me thank you for your prompt response; Loco Bill Canelos.
The loco is a G scale Yellow Pine with a model no. BAC 81496. and  is equipped with a 2.4 ghz Train Engineer receiver.
Title: Re: wiring diagrams for Revolution receiver in Yellow Pine loco
Post by: Loco Bill Canelos on March 21, 2011, 11:01:42 AM
There are two ways the revolution is wired wired depending on weather you have the screw terminal add on or the original wired type that must be soldered on.  let me know which type you have, and I will try to answer tonight if at all possible.  

Are you able to see which two wires go to the motor?

Is the wiring that came apart all in the tender?

Are you using Battery Power?
Text only | Text with Images