What type screws i need for n scale trusks trews to screw fright cars or passenger cars
Please read the Forum Code of Conduct >>Click Here <<
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: the Bach-man on November 26, 2008, 10:26:06 PMjust trying bell or sound that loco dont come with sound
Dear Usher,
What are you trying to control? The device controls the horn or whistle and bell on BL sound locos running on analog.
Have fun!
the Bach-man
Quote from: Tom Lapointe on November 17, 2008, 04:23:37 AMI'm running H O scale if thats helps you.
You didn't specify what scale or type of loco you're planning to run; #22 is pretty light wire. For a typical small HO or N scale loco, pulling a light train, it might be adequate; definely not for a Large-Scale, multi-motored loco (or even some of the heavier HO locos). 16-gauge stranded speaker wire (readily available from Radio Shack) would be a better choice for most model RR applications in my opinion; for heavy O or Large Scale locos (my large-scale, fully-lighted USA Trains 5-car streamliner, powered by 2 - twin motored Alco PA's, draws @ 7.5 amps , for example), the larger the wire size, the better. Tom