With the dcc ez command am I able to run 2 dcc engines separetly like have one switching the other idling
And do I need block wiring like in dc? I'm building an ho scale 1x5 shelf layout.

hello i currently have the ez command controller wired to the layout , i created my own walk around cable with it and once i get my sound equipped gp7 i'm swapping over to the ez dcc comand using the same cable, my question is im going to be using normal dc snap switches, am i able to use a dc pack to operate the switch machine or am i able to run the switch machine wires to the ac terminals on the ez command?
thanks
mark

does bachmann offer the Boston and maine #1575 blue scheme in the dcc/ dc or just with sound?
thanks
Mark

i hope to purchase the ho scale bm gp9 sound value this one is offered in the blue version i would like to swap the blue shell with the maroon and gold shell of the non sound one, are you ablle to this with out any modifications.
ty
mark

Hello i.m currently finishing paying off an ez command and i would like to build my own plug in ports to allow walk around capability,
what are the parts needed and how do you go about doing this? also does the ez comand have  memory to keep the train going once the wire is unplugged and plugged in the next port
thanks
mark

here is a few question
the green and yellow on the reading gp30 seems a little off, what would be the best way to darken the factory green a diluted solution of alcohol and india ink washed  over the green just enough to darken the green. and the yellow looks a little off so i have seen pictures of worn yellow on reading units that looks almost a cream color would a light was of alcohl lighten the yello?
thanks
mark

I recently pickedup 2 spectrum Reading GP30s they un great but some the paint has come off on top of the cab.
what color green and yelloware used on the READING units
thanks
mark