Print Page - Connecting bus to ez command controller?

Title: Connecting bus to ez command controller?
Post by: Mrjjv on January 26, 2019, 10:16:47 AM

I'm working on my first ho layout. It's 5x12. I am soldering feeder wires to several sections of track as I've seen is recommended. I will connect the feeder wires to a bus but I'm wondering how to connect the bus to the EZ Command Controller.
Much appreciated!
Jim

Title: Re: Connecting bus to ez command controller?
Post by: WoundedBear on January 26, 2019, 12:48:24 PM

You will have one buss wire for each rail.....and two wires coming out of the EZ Command unit. Cut the plug off, seperate the two wires for about 6 inches, then solder one wire to each rail buss.

Sid

Title: Re: Connecting bus to ez command controller?
Post by: Mrjjv on January 26, 2019, 09:35:07 PM

Woundedbear.....is it really that easy? I feel silly for asking! Thanks for your help!

Bachmann Online Forum

Discussion Boards => HO => Topic started by: Mrjjv on January 26, 2019, 10:16:47 AM